dmesg - Western Digital WD5000AAKX-0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb26cfff] usable
BIOS-e820: [mem 0x00000000bb26d000-0x00000000bb273fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb274000-0x00000000bb9bffff] usable
BIOS-e820: [mem 0x00000000bb9c0000-0x00000000bbbf6fff] reserved
BIOS-e820: [mem 0x00000000bbbf7000-0x00000000cc615fff] usable
BIOS-e820: [mem 0x00000000cc616000-0x00000000cc81bfff] reserved
BIOS-e820: [mem 0x00000000cc81c000-0x00000000cc86bfff] usable
BIOS-e820: [mem 0x00000000cc86c000-0x00000000cc916fff] ACPI NVS
BIOS-e820: [mem 0x00000000cc917000-0x00000000ccffefff] reserved
BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H81M-VG4 R2.0, BIOS P1.40 07/23/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00D0000000 mask 7FF0000000 uncachable
4 base 00CF800000 mask 7FFF800000 uncachable
5 base 041F800000 mask 7FFF800000 uncachable
6 base 041F600000 mask 7FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3328MB, range: 256MB, type UC
reg 4, base: 3320MB, range: 8MB, type UC
reg 5, base: 16888MB, range: 8MB, type UC
reg 6, base: 16886MB, range: 2MB, type UC
total RAM covered: 16110M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3320MB, range: 8MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 512MB, type WB
reg 7, base: 16886MB, range: 2MB, type UC
reg 8, base: 16888MB, range: 8MB, type UC
e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x41f400000-0x41f5fffff]
[mem 0x41f400000-0x41f5fffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x400000000-0x41f3fffff]
[mem 0x400000000-0x41f3fffff] page 2M
init_memory_mapping: [mem 0x3e0000000-0x3ffffffff]
[mem 0x3e0000000-0x3ffffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xbb26cfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbb1fffff] page 2M
[mem 0xbb200000-0xbb26cfff] page 4k
init_memory_mapping: [mem 0xbb274000-0xbb9bffff]
[mem 0xbb274000-0xbb3fffff] page 4k
[mem 0xbb400000-0xbb7fffff] page 2M
[mem 0xbb800000-0xbb9bffff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0xbbbf7000-0xcc615fff]
[mem 0xbbbf7000-0xbbbfffff] page 4k
[mem 0xbbc00000-0xcc5fffff] page 2M
[mem 0xcc600000-0xcc615fff] page 4k
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0xcc81c000-0xcc86bfff]
[mem 0xcc81c000-0xcc86bfff] page 4k
init_memory_mapping: [mem 0xccfff000-0xccffffff]
[mem 0xccfff000-0xccffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3dfffffff]
[mem 0x100000000-0x3dfffffff] page 1G
RAMDISK: [mem 0x35a30000-0x36d0ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CC8F4080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000CC8FE7C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CC8F4190 00A62F (v02 ALASKA A M I 00000140 INTL 20091112)
ACPI: FACS 0x00000000CC915080 000040
ACPI: APIC 0x00000000CC8FE8D0 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CC8FE968 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000CC8FE9B0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CC8FEEF0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CC8FF9C8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
ACPI: MCFG 0x00000000CC8FFB90 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000CC8FFBD0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CC8FFC08 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CC8FFF78 003493 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: AAFT 0x00000000CC903410 000208 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
NODE_DATA(0) allocated [mem 0x41f5f5000-0x41f5f9fff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f000000-ffff88041ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbb26cfff]
node 0: [mem 0xbb274000-0xbb9bffff]
node 0: [mem 0xbbbf7000-0xcc615fff]
node 0: [mem 0xcc81c000-0xcc86bfff]
node 0: [mem 0xccfff000-0xccffffff]
node 0: [mem 0x100000000-0x41f5fffff]
Initmem setup node 0 [mem 0x00001000-0x41f5fffff]
On node 0 totalpages: 4110789
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13009 pages used for memmap
DMA32 zone: 832553 pages, LIFO batch:31
Normal zone: 51160 pages used for memmap
Normal zone: 3274240 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xcfa00000-0xdf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbb26d000-0xbb273fff]
PM: Registered nosave memory: [mem 0xbb9c0000-0xbbbf6fff]
PM: Registered nosave memory: [mem 0xcc616000-0xcc81bfff]
PM: Registered nosave memory: [mem 0xcc86c000-0xcc916fff]
PM: Registered nosave memory: [mem 0xcc917000-0xccffefff]
PM: Registered nosave memory: [mem 0xcd000000-0xcf7fffff]
PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88041f200000 s86144 r8192 d32640 u262144
pcpu-alloc: s86144 r8192 d32640 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4046535
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16082124K/16443156K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 361032K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3598.942 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7197.88 BogoMIPS (lpj=14395768)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 29988 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (57583.07 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbb26d000-0xbb273fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xcc86c000-0xcc916fff] (700416 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:49:27, date: 12/16/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040CF83800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040CF4A800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040CF3F000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf051a000-0xf051a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf0518000-0xf05183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf0517000-0xf05173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf0516000-0xf05167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0515000-0xf05150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb26d000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb9c0000-0xbbffffff]
e820: reserve RAM buffer [mem 0xcc616000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcc86c000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfbfffff]
pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19328K (ffff880035a30000 - ffff880036d10000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc8616000-0xcc616000] (64MB) mapped at [ffff8800c8616000-ffff8800cc615fff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1481910566.424:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-25-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-25-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0518000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0517000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 12:829:845
rtc_cmos 00:02: setting system clock to 2016-12-16 17:49:27 UTC (1481910567)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
systemd-udevd[146]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x30 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf0516000 port 0xf0516300 irq 25
ata6: SATA max UDMA/133 abar m2048@0xf0516000 port 0xf0516380 irq 25
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90005b8c000, d0:50:99:89:4d:7a, XID 0c000800 IRQ 26
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 1-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATAPI: TSSTcorp CDDVDW SH-224FB, SB00, max UDMA/100
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224FB SB00 PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg0 type 5
scsi 5:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=1a2c, idProduct=2d23
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Keyboard
usb 1-1: Manufacturer: USB
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1A2C:2D23.0001/input/input5
sda: sda1 sda2 < sda5 sda6 >
sd 5:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=8087, idProduct=8008
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8000
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 6 ports detected
hid-generic 0003:1A2C:2D23.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-1/input0
input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1A2C:2D23.0002/input/input6
hid-generic 0003:1A2C:2D23.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:14.0-1/input1
usb 1-2: new low-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=0000, idProduct=0538
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB OPTICAL MOUSE
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0000:0538.0003/input/input7
hid-generic 0003:0000:0538.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
tsc: Refined TSC clocksource calibration: 3598.955 MHz
Switched to clocksource tsc
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
random: nonblocking pool is initialized
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 17 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 33202172k swap on /dev/sda5. Priority:-1 extents:1 across:33202172k FS
systemd-udevd[348]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 130000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:5c: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
audit: type=1400 audit(1481910581.393:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=452 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=471 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=452 comm="apparmor_parser"
audit: type=1400 audit(1481910581.393:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=452 comm="apparmor_parser"
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
init: avahi-cups-reload main process (818) terminated with status 1
audit_printk_skb: 6 callbacks suppressed
audit: type=1400 audit(1481910588.445:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1481910588.445:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1481910588.445:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=812 comm="apparmor_parser"
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: failsafe main process (722) killed by TERM signal
audit: type=1400 audit(1481910589.633:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=975 comm="apparmor_parser"
audit: type=1400 audit(1481910589.633:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=975 comm="apparmor_parser"
audit: type=1400 audit(1481910589.633:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=975 comm="apparmor_parser"
audit: type=1400 audit(1481910589.633:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=980 comm="apparmor_parser"
audit: type=1400 audit(1481910589.633:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=980 comm="apparmor_parser"
audit: type=1400 audit(1481910589.633:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=975 comm="apparmor_parser"
audit: type=1400 audit(1481910589.633:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=975 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1771) terminated with status 1
CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Core temperature/speed normal
CPU2: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
intel_powerclamp: Start idle injection to reduce power
perf interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5010 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
CPU4: Package temperature above threshold, cpu clock throttled (total events = 105)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 105)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 105)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 105)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 105)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 105)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 105)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 105)
CPU6: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
usb 1-2: USB disconnect, device number 3
usb 1-2: new low-speed USB device number 4 using xhci_hcd
usb 1-2: New USB device found, idVendor=0000, idProduct=0538
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB OPTICAL MOUSE
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0000:0538.0004/input/input12
hid-generic 0003:0000:0538.0004: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
usb 1-2: USB disconnect, device number 4
usb 1-2: new low-speed USB device number 5 using xhci_hcd
usb 1-2: New USB device found, idVendor=0000, idProduct=0538
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB OPTICAL MOUSE
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0000:0538.0005/input/input13
hid-generic 0003:0000:0538.0005: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
CPU7: Package temperature above threshold, cpu clock throttled (total events = 113)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 113)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 113)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 113)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 113)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 113)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 113)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 113)
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal